We have now upgraded all our JJ EL34 valve kits. Â Our kits now include the JJ EL34 II. The reason? The JJ standard EL34 does not sound nearly as good as the EL34 II . Â The standard EL34 is known for sounding “thin” whereas the EL34 II has much stronger low end and mids making for a much fatter solid tone. All the EL34 kits on the drop down menu when selecting ” Make” and […]
A lovely 1964 Vox AC30/6 came along as it was felling a bit poorly. The amp sounded- well- just not like an AC30 should. The vibrator / tremolo pedal had disappeared in the mists of time. The amp had been recovered in the proper basketweave Tolex and had a new grill cloth so it looked the part. The exact model is the Vox AC30/6 and while not a Top Boost model it is the “Treble”
There is a lot of confusion in the market on Svetlana and Winged C Valves.  A number of UK suppliers claiming they are selling current production Winged C valves which are made in the St Petersburg factory in Russia. By the way, the “C” is the Russian letter for “S” so it is the logo for the brand using the company name first letter. Here is a cut and paste from a well known valve reseller
We have broadened our range of EL34‘s in our store. But which one is best for my amp? This is a handy quick guide to EL34’s We now have :- JJ EL34 JJ EL4 II JJ EL34L EH EL34 Tung Sol EL34B We offer all the above in matched pairs and quads. The EL34 was one of the last additions to the audio valve market and it was introduced by Mullard in the early 1950’s.
Which EL34 ? We explain differences on selected types Read More »
Another Fender Hot Rod Deluxe arrived . This was one of the early ones in really nice physical condition dating from around 1998.  It was made in the USA. Alas, I only ever see sick ones. This one had about 0.2 watts out on full volume and totally distorted. The valves had not been changed in years and the output valves were original Sovtek 5881’s rebranded as Groove tubes. They were still kind of working
The Fender Blues Jr is a popular amp. It has enough power with 15 watts for small gigs and it does have the Fender tone with a hint of “Britishness” with the EL84 output valves. . The reverb circuitry is solid state and three 12AX7’s for the pre-amp stages. The 15 watts comes from a pair of EL84’s feeding into a 12 inch speaker. The amp is constructed on printed circuit boards. One holds the
An ART Pro MPA II Tube Microphone Amplifier arrived for repair. This two channel unit uses two 12AX7 valves. They are made in China. The fault was blowing mains fuses. I dismantled the unit and was very surprised to see that the power switch does NOT isolate the 230volts AC mains. It only switches on and off the low voltage to the main board !! The transformer is connected permanently to the mains no matter
ART PRO MPA II Tube Microphone Amplifier Safety Concerns check this out Read More »